The motorcycle helmet and all protective equipment are exposed to several stresses. It also displays your style and reflects your personality. With frequent use, you will quickly notice dirt stains on the visor, and the outer part of the helmet.
The bad smell emanating from the inside, and your sticky hair will also disturb you, and spoil those moments of pleasure you have always enjoyed on board your motorcycle.
Whether you are an experienced motorcyclist or an inexperienced beginner, you have a strong interest in cleaning your helmet both outside and inside. This way you will certainly prevent your motorcycle helmet from sticking due to the accumulation of sweat.
Here’s how to maintain it.
Executive Summary
2 | How to clean the outside of the helmet?
2.1 Hull cleaning
2.2 Cleaning the visor
3 | How to clean the inside of the helmet?
3.1 Cleaning a helmet with removable foams
3.2 Cleaning a helmet with fixed foams
3.3 Cleaning the ventilation openings
Conclusion
The instruction manual is an interesting document that should always be kept. Most brands such as BMW, Harley Davidson, Shoei, Shark, or Arai include this famous sheet in the packaging of the equipment.
By reading the instructions, you will know if your helmet can be dismantled inside so that you can clean it more effectively. You will also take note of the specific recommendations regarding the cleaning products to be used or to be used. avoid.
2 ! How to clean the outside of the helmet?
2.1 Hull cleaning
It is highly recommended to start by hand washing with warm water and non-aggressive soap. If the dirt stains persist, you can use a non-abrasive sponge and repeat the cleaning process. The objective is to avoid scratching the outer surface as much as possible and to protect the paint’s shine.
Please note that matt helmets are very sensitive and require special care with suitable cleaning products such as Motul specific matt helmet cleaner or only with a neutral detergent.
In any case, intensive rubbing on the outer surface of the helmet may saturate it in the long term and remove the thin layer of varnish. In this respect, it is recommended to limit the use of intensive cleaning for sensitive situations.
Specific maintenance products are also recommended because they do not contain any chemical agents that could affect the paint.
2.2 Cleaning the visor
First fool the screen in warm water and wait a few minutes before cleaning again with a soft cotton cloth and a neutral detergent. Be very careful not to scratch the screen, so use suitable towels such as Motorex wipes.
These products contain highly effective additives for dissolving traces of dust and insects. Finally wipe with a microfibre cloth to remove any traces of water.
3 | How to clean the inside of the helmet?
It must be acknowledged that internal cleaning is much more delicate than on the outside.
3.1 Cleaning a helmet with removable foams
The best way to clean all components of removable foams is to wash them in the washing machine (unless otherwise specified by the manufacturer) by choosing the washing cycle indicated on the label. This intensive cleaning with an antimicrobial detergent will remove dirt, bacteria, and bad odors accumulated in all parts of the foam.
After cleaning, dry the foam of the helmet in the open air to avoid any damage due to the use of a high temperature of the tumble dryer.
3.2 Cleaning a helmet with fixed foams
The helmet with fixed foams is certainly more difficult to clean. In this case, it is better not to mislead the entire inner part in the water because it would be difficult to dry it completely afterward. If you prefer to do so, however, make sure that the drying is perfect. Poor drying may lead to the development of fungi and moulds as a result of the moisture that will settle in the helmet.
Stick to a superficial interior cleaning with a cleaning agent, such as Helmet Care Motorex helmet cleaning foam, which has the advantage of maintaining the interior upholstery and eliminating grease and unpleasant odours.
3.3 Cleaning the ventilation openings
The ventilation openings must remain open at all times to allow adequate air circulation inside the helmet. This is why it is important to clean them properly from any obstructions such as insects or dirt. Insert a cotton swab into the various ventilation openings to detect and remove any foreign matter. Pass then the helmet in front of a fan to remove any dust residues.
Conclusion
The motorcycle helmet is an essential element that must be properly cleaned and maintained. To maintain a good state of cleanliness and optimize the operation of your equipment, here are some practical tips:
- Never use solvents or petroleum-based cleaning products.
- Do not store your gloves inside the helmet, they may make it more dirty.
- Use a protective film screen for the visor to protect it from scratches and insect tracks.
- Choose a helmet with a removable liner for easy interior cleaning.
Finally, always keep the instructions!
